
When a shop is refitted, an office moves or a business swaps its old camera system for a newer one, the CCTV recorder is usually the last thing anyone thinks about. It often goes out with the old cables, or leaves in the installer's van. That small box under the counter can hold weeks of recordings of staff, customers and visitors, so it needs the same care as any other drive holding personal data.
Why old CCTV footage needs proper disposal
Recordings in which people can be identified are personal data under UK GDPR and the Data Protection Act 2018. If your business runs the cameras, it is normally the controller of that footage. You are responsible for keeping it secure and for not holding it longer than you need, and that does not stop when the system is switched off. A recorder sold online, dumped in a skip or left in a storeroom is still footage under your control, just not well protected.
The recordings can show more than faces: who opens up and locks up and when, where the safe or stockroom is, which doors have alarms, and staff routines. Even a recorder that "only" covers a car park or reception can say a lot about how your premises work.
Find every place the footage lives
Before anything is removed, list everything in the system that could hold recordings or settings:
- The recorder itself. A DVR (for older analogue or HD-over-coax cameras) or an NVR (for IP cameras) usually has one or more standard 3.5-inch hard drives inside. Larger units may hold several drive bays, so open it up or check the storage screen rather than assuming there is one disk.
- Memory cards in cameras. Many IP cameras can record to a microSD card as a backup if the network drops. These are easy to miss once the cameras are on a ladder and coming down.
- Exported clips. Incidents copied to USB sticks, DVDs or laptops for the police, an insurer or a manager tend to sit in desk drawers long after the event.
- Cloud and app access. If the system linked to a phone app or cloud service, remove the old recorder from the account and close any logins that will no longer be used, so nobody can view the old device or its recordings remotely.
Write down the make, model and serial number of each recorder and, once you have them out, the serial number of every drive. That list is what you will check the certificate against at the end.
Keep what you must, before anything is destroyed
Destruction cannot be undone, so check first whether any footage still has to be kept. Typical reasons include:
- an incident that has been reported to the police, or a crime reference that is still open;
- an insurance claim, accident at work or customer complaint that is not yet settled;
- a subject access request from someone asking for footage of themselves, which you must deal with rather than avoid by destroying the recordings;
- any instruction from your solicitor or HR team to preserve evidence.
Export the clips that are needed, check they play, store them securely with a note of why they are being kept and until when, and only then release the drives. Everything else can go: holding old general footage "just in case" sits badly with the duty not to keep personal data longer than necessary.
Why formatting the recorder is not enough
Most recorders have a "format" or "initialise HDD" option, and it is tempting to press it and hand the unit over. That option is designed to clear space for new recordings, not to make old ones unrecoverable. Depending on the model, much of the old footage can remain on the platters and be readable with the right tools. CCTV drives sold as "surveillance" models are ordinary SATA hard drives underneath, so anyone who buys a second-hand recorder or a pulled drive can connect it to a computer.
If the drives are going to be reused or resold, they need a proper overwrite that is checked and recorded. In most cases businesses simply want them gone, and physical destruction of the drives is the straightforward answer. The memory cards from cameras and old USB sticks with exported clips are small and cheap, and are best destroyed rather than wiped. Our page on data destruction services explains the methods we use for each type of media.
Watch out for the "we'll take the old one away" offer
Installers fitting a new system often offer to take the old recorder with them. That may be convenient, but it means your footage leaves the premises with no record of what happens to it next. If you go down that route, ask in writing what they will do with the drives and whether you will receive anything showing they were destroyed. The simpler option is to have the installer remove the drives and leave them with you, so they can go with your other IT equipment for destruction.
The same applies to leased or rented systems going back to the supplier. Check the agreement: you may be able to keep or destroy the drives and return only the hardware, rather than sending your recordings back in the box.
Disposing of the rest of the system
Once the drives and cards have been taken out, the recorder chassis, cameras, monitors and power supplies are electrical waste and should be recycled properly rather than binned. They can be collected together with the drives, so everything leaves in one go. See hard drive disposal and recycling for how the rest of the equipment is handled.
Get a certificate you can match to your list
At the end, you should hold a certificate of destruction that lists the drives by serial number, the method used and the date. Compare it with the list you made at the start. If a drive is missing from the certificate, find out why before you file it. Our guide to what a certificate of destruction should include covers what to look for.
Arrange a collection
If you are replacing or removing a CCTV system in London, we can collect the recorder drives, camera cards, old export media and the rest of the kit, destroy the data using government-approved methods and issue a certificate of destruction. We are registered with the ICO (ZA060744). Call 020 7064 4996 or book a collection online.
